1. Microcontroller: ATmega328.
2. Operating Voltage: 5V.
3. Input Voltage (recommended): 7-12V.
4. Input Voltage (limits): 6-20V.
5. Analog Input Pins: 6.
6. DC Current per I/O Pin: 40 mA.
7. DC Current for 3.3V Pin: 50 mA.
8. SRAM: 2 KB (ATmega328).
9. EEPROM: 1 KB (ATmega328).
10. Clock Speed: 16 MHz.
11. Flash Memory: 32 KB of which 0.5 KB used by bootloader.
12. Digital I/O Pins: 14 (of which 6 provide PWM output).
|
1. It is an ATmega328P based Microcontroller
2. The Operating Voltage of the Arduino is 5V
3. The recommended input voltage ranges from 7V to 12V
4. Input voltage: 6V to 20V
5. Digital input and output pins-14
6. Digital input & output pins (PWM)-6
7. Analog i/p pins are 6
8. DC Current for each I/O Pin is 20 mA
9. DC Current used for 3.3V Pin is 50 mA
10. Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
11. SRAM is 2 KB
12. EEPROM is 1 KB
13. The speed of the CLK is 16 MHz
14. In Built LED
15. Length and width of the Arduino are 68.6 mm X 53.4 mm
16. The weight of the Arduino board is 25 g
|